Post lift
A post lift is a lifting device which is typically used to raise vehicles inside buildings for easy repair and maintenance access. Most post lifts are above ground, but there are also in-ground varieties.
Contents |
[edit] Two post lift
This is the most commonly-used type of post lift. It consists of two upright columns, four adjustable arms attached to a carriage assembly, and two hydraulic cylinders. It is usually mounted to an existing concrete structure, at least 4 inches thick. Most are powered by an electric/hydraulic power unit.
The power unit delivers pressurised hydraulic fluid to the cylinders. A set of equalisation cables is installed between the carriages to ensure that all four arms move together. Automatic safety arm locks are designed to secure the lift arms, once the arm pads have been properly positioned under the vehicle.
[edit] Four post lift
This type of lift allows the vehicle to be driven onto two runways and lifted by its tyres. The advantage of this lift is that their is full access to the underside of the vehicle.
[edit] Drive-on parallelogram
This is a drive-on lift with two runways. The lifting mechanism can move the vehicle a short distance when lifting or lowering; or it can simply be lifted straight up and down. The two parallel runways are usually synchronised by hydraulic or electronic means; sometimes with a torsion bar connected to opposing legs.
[edit] Scissors
Surface-mounted and in-ground scissor lifts are available; either as a drive-on with runways or frame/body-engaging. It is similar to a parallelogram lift but raises and lowers the vehicle in a straight vertical path.
[edit] In-ground lift
This type of lift has its assembly installed below the concrete floor. One or more hydraulic pistons or scissors mechanisms can be used depending on the weight to be lifted.
[edit] Wheel engaging mobile units
Also known as a mobile column lift, this consists of individual lifting columns used in sets of 2, 4, 6, or more units. Each individual column is mobile and contains an electric power unit. Cables or wireless technology is used to synchronise the column lifting and lowering.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
The nature of EPCs, crticism and inaccuracies.
History, issues and redesign.
From waste recycling to energy performance the hierchy.
An introduction to WERCS and WEEE responsibilities
Dealing with 2 million tonnes of waste equipment a year.
Global BACS Market: analytics and optimisation
A BSRIA glance at building automation and control systems.
What it is and how to use it.
Types of insulating plaster by binder and insulant.
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.
For the World Autism Awareness Month of April.